亞洲知識產權資訊網為知識產權業界提供一個一站式網上交易平台，協助業界發掘知識產權貿易商機，並與環球知識產權業界建立聯繫。無論你是知識產權擁有者正在出售您的知識產權，或是製造商需要購買技術以提高操作效能，又或是知識產權配套服務供應商，你將會從本網站發掘到有用的知識產權貿易資訊。

返回搜索結果

Open FET Sensor - Open-Gate Junction FET Electrometer with extremely low leakage current

總結: The Open FET sensor is a field effect transistor-based sensor in which the gate electrode is connected only to the signal to be measured. Despite the extreme measuring sensitivity, the Open FET sensor is relatively robust. It tolerates input currents of a few 10 μA outside the measuring range and thus protects against electrostatic charges. The Open FET Sensor is particularly well suited for scanning force and scanning tunneling microscopy at low temperatures.

技術優勢: Simple setup
Low cost
High sensitivity
High robustness
many applications

技術應用: The Open FET sensor offers the possibility to measure small voltages at extremely high impedance. It can be used in scanning force and scanning tunneling microscopy or as an electrometer

詳細技術說明: The Open FET sensor is a field-effect-based sensor in which the gate electrode is connected only to the signal to be measured and not as usual to other electronic components. By cooling the n-junction FET the leakage current can be reduced to 10-20 A. This means that the Open FET sensor comes very close to an ideal voltage meter. The input capacitance amounts to approx. 5 pF; the full bandwidth is 10 kHz. The input noise is less than 1 µV/√Hz. The left-hand diagram shows the output signal for a square wave signal of 60 μVpp at 3 kHz. Using an integrating mode currents of 10-18 A can be measured, if the bandwidth is reduced. The figure to the right displays the signal at an input current of +/- 1×〖10〗^(-18) A

分類: - international:
G01Q30/10; H03F1/56

- cooperative:

H03F1/56; H03F2200/261

欲了解更多信息，請點擊這裡